Evinrude Outboard Motors
|Headquarters||Sturtevant, Wisconsin, United States|
|Parent||Bombardier Recreational Products|
Evinrude Outboard Motors is an American company that builds a major brand of outboard motors for boats. Founded by Ole Evinrude in Milwaukee, Wisconsin in 1907, it was formerly owned by the publicly traded Outboard Marine Corporation (OMC) since 1935. But OMC filed for bankruptcy in 2000.
It is a subsidiary of North American Bombardier Recreational Products.
Evinrude outboards produce two-stroke direct-injected engines ranging from 25 hp (19 kW) to a 3.4L V6 300 hp. They used carburetors until the late 1990s, when EPA Clean air regulations mandated new technologies. OMC partnered with FICHT, of Germany to introduce Direct Injection. Unsurpassed Durability testing took place, and Production Started prior to another round of EPA Regulations. Modifications were made at that point to bring the motors up to standards. these modifications were not carefully engineered and designed and caused powerhead failure and even a recall on the motors. The losses on these motors, the loss of reputation and the surge of competition from Japan and Mercury, pushed the company into Bankruptcy in 2000.
In 2001 Bombardier acquired the Evinrude and Johnson Outboards brands, the FICHT technology was reengineered into E-TEC direct injection. This improved fuel efficiency and reduced emissions, oil usage, noise levels, and maintenance needs. This is due in part by a pin point oiling system which only applies oil to the necessary components, unlike the original two stroke motors. Evinrude E-TEC was the first outboard engine technology to win the American Environmental Protection Agency 2004 Clean Air Excellence Award, which recognizes low emission levels.
|This section needs additional citations for verification. (November 2010) (Learn how and when to remove this template message)|
Ole Evinrude was born in Gjøvik, Norway on April 19, 1877; five years later, his family emigrated to the United States, settling near Cambridge, Wisconsin. Interested in mechanics from an early age, Evinrude became an apprentice machinist at age 16 and eventually a master pattern maker, as well.
Along with a growing number of people at the turn of the century, Ole Evinrude was fascinated by the potential of the newly developed internal combustion engine, and he set up a firm to build small engines.
While Evinrude concentrated on the mechanical and engineering aspects of the new firm, he entrusted the bookkeeping and business end of the firm to his assistant, Bessie Cary. The story surrounding Evinrude's invention of the outboard boat engine revolves around a picnic that Cary and Evinrude enjoyed on Okauchee Lake, in the lake country west of Milwaukee, two and one-half miles from shore. Cary expressed a desire for a dish of ice cream and Evinrude rowed back to shore for it. Of course, the ice cream was melted by the time he returned, but Evinrude, inspired by the incident, was determined to design an engine that would replace the oar as a means of boat propulsion.
Cary and Evinrude were married in 1906. In 1907, Evinrude founded Evinrude Motors in Milwaukee. The firm immediately began to develop its first outboard motor, a one-cylinder, 1.5 hp (1.1 kW) model, which became an instant success upon its introduction in 1909.
Because of Bessie's poor health, the Evinrudes sold their company in 1913, and Ole agreed to not re-enter the outboard motor business for five years. His inventive mind kept busy, however, and during his "retirement", he devised a much-improved, two-cylinder outboard engine. In 1921 he and Bessie formed the ELTO Outboard Motor Company (ELTO standing for Evinrude's Light Twin Outboard). This new outboard engine was also very successful, and in 1929 the ELTO company merged with the original Evinrude company (since renamed the Outboard Marine Corporation) and the Lockwood Motor Company, with Evinrude the president of this new company.
Bessie, who had retired in 1928 for health reasons, died in 1933 in Milwaukee. Ole Evinrude died the following year on July 12 in Milwaukee, and the company was taken over by their son, Ralph. In 1936 the Evinrude company merged with the Johnson Motor Company to form the Outboard Marine Corporation. During World War II the company manufactured motors for various types of military marine craft.
In the 1930s and 1940s, 4-60 engines were used in midgets racers. These 59.4 cu in (973 cc) water-cooled horizontally opposed engines ran on special racing fuel: 82% methanol, 10% toluene or benzol, and 8% castor oil (which was available in 5 US gal (19 l; 4.2 imp gal) cans from drug stores), plus tetraethyllead (also available in drug stores) to avoid engine knock. They would rev close to 8,000 rpm and could produce 80 hp (60 kW), close to 1 horsepower per pound (1.7 kW/kg) of engine weight.
OMC declared chapter 11 bankruptcy in 2000 and its assets were subsequently acquired by Bombardier Recreational Products, which continues to build Evinrude branded outboard motors. The modern Evinrude E-TEC motors are among the lowest emission and highest power-to-weight ratio outboards currently produced.
Evinrude's name continues today not only on many an outboard motor but also by the presentation of the Ole Evinrude Award. Given annually by the New York Boat Show, this award is presented in recognition of an individual's contributions to the growth of recreational boating.
In the 1977 movie, "The Rescuers," the dragonfly in the Bayou was named Evinrude The_Rescuers.
- U.S. Environmental Protection Agency, Clean Air Act Advisory Committee. (2004) Retrieved November 1, 2010. Retrieved from http://www.epa.gov/air/cleanairawards/winners-2004.html.
- "The Outboard Motor Turns 100", boatingmag.com
- Circle Track Magazine, 9/84, p.77.